x
Our website uses cookies. By using the website you agree ot its use. More information can be found in our privacy policy.

Responses

Define the Responses

 

  Define the maximum percent thinkness reductionresponses_prc_thick_red_max1.png

  1. Select the Responses panel. 
  2. From the possible response types select: D3PLOT.
  3. For Parts to be included choose All Parts.
  4. For Result Type select Misc.
  5. For Component select %_thickness_reduction.
  6. And select the Maximum Value.
  7. And the maximum value should be taken from time 0 to the current time.
  8. For Response Name enter prc_thick_red_max.
  9. Push the Add button.

 

 

 

 

  Define the FLDresponses_fld1.png

  1. From the possible response types select: FLD.
  2. For Parts to be included choose List of Parts.
  3. In the List of Parts enter 1.
  4. Push the (Add) > button.

  Repeat the previous steps and create this list of parts:

  List of Parts:
1
2
3
  1. For Sampling locatin select Center surface.
  2. For Load curve ID enter 90.
  3. For Response Name enter PLD.
  4. Push the Add button.

 

  Define the minimum shell thicknessresponses_thick_min1.png

  1. From the possible response types select: D3PLOT.
  2. For Parts to be included choose List of Parts.
  3. In the List of Parts enter 1.
  4. For Result Type select Misc.
  5. For Component select shell_thickness.
  6. And select the Minimum Value.
  7. And the minimum value should be taken from time 0 to the current time.
  8. For Response Name enter thick_min.
  9. Push the Add button.